Used in Waste Water Treatment CAS 55895-98-2 RCWDA Water Decoloring Agent

• CAS No.: 55895-98-2
• Formula: C4n5clh10-(C4n5clh8)N-C4n5clo2h10
• Status: Liquid Catalyst
• Application Industry: Industry
• Transport Package: 1250kg IBC
• Origin: China
• Model NO.: RCWDA
• HS Code: 38099100
• Production Capacity: 30000

Product Description

Product Description

Appearance: colorless to yellowish translucid liquid

Solubility: soluble in water, safe, non-toxic, harmless, no-flammable and non-explosive

Properties:
1. Water Decoloring Agent is a special product for de-coloring, flocculating, CODcr decreasing and other applications.
2. It is used to remove color of waste water generated by textiles process houses and dyes industries, with strong decolorization (50%~99%) and removal of COD (50%~80%). Also for many other different waste water.

Main indexes:

Index	standard
Solid Content by wt %	50 min
Specific Gravity at 20°C	1.1-1.3
PH Value (30% Solution)	3-6
Viscosity (20°C, cps)	50-250
Solubility	Soluble with water at any rate

 

Detailed Photos

 

Application

1. Decoloring, flocculating, COD decreasing
2. Mainly used for color removal for dense color waste water from dyestuffs plants, suitable to treat waste water with activated, acidic and disperse dyestuffs
3. Can also be used to treat waste water from textile industry and dye houses, pigment industry, printing ink industry and paper industry

Usage:
1. Dilutes with 10~40 times water and then dosed into the waste water directly, after being mixed for several minutes, waste is precipitated or air-floated and the water become clear
2. Ph index of the waste water should be adjusted to 7~10 for better result
3. If colority and COD are relatively high, it can be used with the help of Polyaluminum chloride to reduce treatment cost, whether polyaluminum Chloride is used before or afterwards depends on the flocculation test and the treatment process

Application Dosage:

Products	Dosage	Advantage
RCWDA water decoloring agent	80-150 ppm	Reduce 70-90% sludge output Treatment cost is only about 40-50% than other traditional chemical
100-200ppm PAC	100-200 ppm	Not necessary if performance is already good
1-2 ppm Polyacrylamide	1-2 ppm	Not necessary if performance is already good

*ppm=1MG/L

The experimental results

Important Notice

1. It can be stored at room temperature, it cannot be placed in the sun

2. It is slightly acidic, when skin contact, wash immediately with plenty of water

3. We normally list 24 months as the shelf life in our COA, the real shelf life is actually much longer than 24 months if it's stocked in good condition (bags are sealed enough, away from direct sun-light, moisture and other incompatible chemical materials)

Company Profile